Tips for Sealing Your Office Building with Spray-Foam Insulation

If your office building is too cold in the winter and too hot in the summer, then it likely needs to be better insulated. One of the best ways to insulate your building is to use a spray-foam product to seal up any holes or gaps in windows, doors, and electrical outlets. However, working with spray foam can be a bit tricky if you want the results to look nice and don’t want to make a mess in the process. To this end, follow these tips to seal your office building with spray foam.

Tip: Wear Disposable Latex Gloves When Working with Spray Foam

Since spray-foam products are sticky and quickly expand and harden, it is important that you wear a pair of disposable latex gloves when you work with spray foam. Wearing disposable gloves enables you to quickly remove any excess foam using your finger before it has a chance to harden. If you need to do this, then you can quickly take off the gloves and replace them with a new pair. Without gloves, the spray foam will stick to your finger and make a mess.

Tip: Use Silicone Caulking Before Insulating with Spray Foam

Since spray foam is appropriate for insulation, but silicone caulking is better for sealing holes and cracks, you should caulk any areas of your office building where there are cracks or holes where the outside air is getting into the building. For example, areas around windows and doors should be caulked before you insulate them with the spray foam.

Tip: Warm the Thicker Solution’s Tank Using an Electric Blanket

When you are using a two-tank spray-foam kit to insulate your office building, you should heat the tank that contains the thicker solution. Since this solution is about the same texture as molasses, it needs to be warmed so it will flow better from its container. The easiest and safest way to heat the tank is to wrap it with an electric blanket. Set the blanket on a low setting and allow it to slowly heat the spray foam’s tank.

Tip: Test the Application Gun on a Piece of Waste Cardboard Before Attacking Your Office Building

Finally, if you do not have prior experience working with spray-foam insulation, then you should test the application gun on a scrap piece of cardboard before you start shooting it onto your office building. This simple step will allow you to get better control over the application gun before you attack your office building.

Talk to a company such as SPRAY FOAM DISTRIBUTORS for more tips. 

Learn More

3 Great Reasons To Purchase A CNC Lathe Machine For Your Metal Milling Machine Shop

Having a CNC lathe machine in your machine shop can be incredibly beneficial for you. This article will discuss 3 great reasons to purchase a CNC lathe machine for your metal milling machine shop. 

It Uses Computer Software To Create The Metal Products

A CNC, or computer numerical control, lathe machine is going to be completely controlled via a computer. You are first going to create the cut of metal that you need by using the computer software. This will allow you to choose the exact dimensions that you need for your cut of metal, as well as any other specific features that it needs to have. You will be able to see a visual image of the final product on the screen, allowing you to see what your product is going to look like before it is ever created. For example, if you are making a screw, you will be able to ensure that it is the proper size, is the right shape, and has the correct grooves before it is created. You will then proceed to use the CNC lathe machine to actually make the cut of metal that you need. It will use spindles to cut and shape the metal until it is perfect.  

It Has The Ability To Automatically Change Tools

When making a metal product, several different tools are going to need to be used in order to get all of the dimensions, cuts, grooves, etc. just right. When you are making this metal piece by hand, you are going to need to change out your tools over and over again. This can be a lengthy process and can be quite tedious. However, when you use a CNC lathe machine to make your metal product, it not only has all of the tools that you need, but it also switches them out automatically via computer programming. This allows you to get the perfect metal product without having to worry about doing any type of manual labor in the process. 

You Can Create Several Metal Products At One Time

With a CNC lathe machine, you can program it to make as many or as few metal products as you need. Being able to determine right up front how many items you need to have created can save you from making too few or too many. This can save you money because you won’t have extra items that you don’t need, or you won’t have to waste time by having to go back to create more metal products to finish a project. Also, because you can program the machine to make them all at one time, you aren’t going to have to worry about going back after each piece is made and reprogramming it to make another one. This saves you a great deal of time and makes your machine shop more productive, which can potentially increase your profit. 

For more information, contact local professionals like Aero Mechanism Precision.

Learn More

What You Need To Ask Before Hiring A Laser Cutter

When you need parts or pieces cut with precision, laser cutting is the best manufacturing method to choose. This is because you will end up with sharp, clean edges, and a consistent product or part no matter how many you have made. The following guide can help you interview laser cutters so that you find the one that fits best with your needs.

What are the file requirements for laser cutting?

The vast majority of laser cutters require vector files of the part to be cut. If you are designing in-house, then make sure your graphics person has the ability to render the final design in vector. If you do not have a vector file, the laser cutter may offer drafting services for a fee. Inquire into file needs and services before accepting any quote.

Which materials are provided?

Not all laser cutters work with the same material. Paper and cardboard cutting is probably the most common. Wood, vinyl and plastic are also commonly cut materials, although some cutters may not allow PVC due to the fumes produced as it it cut. If you need metal cut, make sure you find a laser cutter that works with the material. Also, verify that they actually cut metal and don’t just engrave it.

What are their size limitations?

Most cutters have size limitations as set by the specifications of their equipment. If you have a large item you will need to make sure your cutter has the means to fabricate it. If your item is too large for standard laser cutting methods, it may be necessary to redesign it into multiple parts that are assembled after cutting.

Do they offer samples?

If you aren’t familiar with the work of a particular laser cutter, inquire into samples. Some cutters provide free samples demonstrating the cut work on a variety of materials. Others may make a sample of your specific design, but this is usually done for a small fee.

What is the average turn around time?

This will vary depending on how busy the cutter shop is and the size of your project. If you will be depending upon the cutter to keep your own production lines going, make sure they will offer a specified and committed turn-around time for your project. This can be included in their bid for the work. For one-time or infrequent projects, check with the cutter to see how far in advance you should place an order on average to meet your turn-around time needs.

For more help, contact a company, such as Midbrook Factory-For-Hire, that specializes in laser cutting.

Learn More

Accessories To Add To Your Automated Driveway Gate To Enhance Security

Even after automating your driveway door, you still need to add other accessories to enhance security. Whether you have a sliding or swinging automated gate, a criminally minded individual will still find a way into your property. For example, a burglar can jump over the fence and cut the chain on your chain slide gate, gaining full access to your house. You need to add the some other safety products to your gate to increase your security.  Take an opportunity to look at some of the security accessories described below and find the best one that suits your needs.

Magnetic lock

Adding a magnetic lock to your automated gate will enhance its security immensely. This lock is equipped with a two-part system that uses the strike plate and magnet to secure your gate. The magnet stays in place as long as the gate system is active. To gain access through the gate, you need to enter a unique code into the magnetic lock panel so that it is released from the strike plate. Alternatively, the magnetic lock is also opened using a remote to issue a command. It is difficult for any intruder to bypass this lock unless they cut the electrical supply of the entire gate. To counter this threat, you need to install a battery powered backup system in case of a power outage. By so doing, you can rest assured that your driveway is very secure.  

Intercom system

If you cannot see your driveway gate when you are inside the house, you need to install an intercom system. The guests and delivery trucks will use it to announce their arrival before gaining access to your property. You should consider using an intercom system with video surveillance so that you can see and talk to anyone waiting at your gate. This system will also help you to identify anyone trying to enter your property without consent.

Infrared sensor

Another accessory you can add to your driveway gate is an infrared sensor.  This product emits a light beam that runs from one side of the gate to the other. If an intruder passes through the invisible light, the beam is broken and the gate stops and reverses.  Also, the infrared sensor prevents small pets and children who may slip out unnoticed through a closing gate from leaving the property.

Installing any of the accessories described above on your automated driveway gate will boost the security of your house significantly.  Purchase your products from a qualified installation company like Incom Inc and let their professionals carry out the task of adding these accessories to your gate.  

Learn More

Industrial Equipment: Should You Rent Or Buy It?

Whether you’ve just recently started a new business, or you’ve been in business for years, you may find it difficult to decide if renting or purchasing necessary equipment is the best option. There are situations in which renting would be easier and more cost-effective, but other situations might warrant purchasing equipment. Here is an overview of both options, to help you decide which choice would be best for you and your company:

How often will you use the piece of equipment?

This is a very important question when determining whether renting or buying is the best option. If you just accepted a one-time job that will require the use of an aerial scissor lift and you don’t plan to use this particular piece of equipment in the future, then renting would probably be the smartest, most cost-effective option. However, if on the other hand you have scheduled numerous jobs in the future that will require the use of the same piece of equipment, then you might seriously want to consider purchasing the item.

What is your budget?

Before making a final decision regarding whether to rent or own, you need to resort to your business plan and budget. What would the cost renting vs buying be? Which solution would be more cost-effective in the long-term? You also need to determine whether you can comfortably afford to purchase the equipment, without causing your company to experience financial distress. If you believe that purchasing the needed equipment would cause too much of a financial blow, then perhaps renting on an as-needed basis would be the better option, at least until your finances more stable.

How long do you plan to keep the equipment, if rented?

The length of time that you plan to keep the equipment, should you decide that renting is the best option, is very important when it comes to making such a determination. Find out what the exact cost of renting the piece of equipment for whatever period of time you feel you will need it will be. Since rental prices have a tendency to quickly add up, if you need the item for an extended period of time, then purchasing it would likely be in your best interest. Even if you have to purchase a pre-owned piece of equipment to keep costs down, it could possibly be less expensive than renting in the long-run.

Running a business can sometimes be quite challenging, especially when it comes to making important financial decisions. When it comes to making decisions regarding major purchases, however, decision-making doesn’t have to cause distress. As long as you take the time to carefully consider the decision and weigh the pros and cons, you should feel pretty confident that you will make the right choice. Check out the site to learn more

Learn More