3 Ways To Prevent Rust In Your Air Compressor

An air compressor can last for many years (you can try this out here with professional help), whether you use it at home or in a commercial setting. However, one thing that can cause serious damage to your air compressor is rust. Rust can occur inside the tank or on the outside of the unit, and either way, it can present a big problem. Luckily, following these tips should help. 

1. Drain Your Tank Daily

First of all, you have to make sure that you drain the water out of your tank every day. Allowing water to sit in the tank for extended periods of time can cause the tank to rust from the inside out, and the problem with this is that it can be a lot more difficult to handle rust on the inside of the tank than on the outside. Luckily, draining the water out on a daily basis can help prevent this problem.

2. Store Your Air Compressor in the Right Place

Even though your air compressor is a tough unit, it can still be damaged if it isn’t stored properly. Keeping it in a dry place can help prevent it from becoming rusty, so make sure that you keep it in your garage, in a storage building or inside your shop, where it cannot get wet. This can not only help prevent rust, but it can also help prevent water damage to other components of your unit and can make it last a whole lot longer. It will also keep it looking better.

3. Keep it Clean and Painted

In a busy day of working with your air compressor, it’s normal for it to get a little dirty. It might get dirty and greasy in your shop, or it might get debris on it when you are using it to provide power for a tool. Even though it might be normal for it to get dirty, you won’t want to leave the debris on your air compressor for long, or it could contribute to a rusting problem. Make sure that you clean it off regularly, and paint it when it needs it — such as when the paint begins to chip or after noticing a small amount of rust — to help keep it in good condition.

Rust can be a major problem for any air compressor, but if you follow these three tips, you should be able to prevent this issue so that you can keep your air compressor working and in good condition for longer.

Learn More

Addressing Common Concerns About Water Well Contamination

Access to water is a necessity for any home, and if you have recently purchased a home that lacks access to a local sewer system, it will likely have a water well in place. However, there are many people that have limited experience with these devices, and this can cause them to be unsure of what should be done when a problem arises. Fortunately, after you have learned the following answers to questions about contaminated wells, you will likely find yourself better able to understand this issue and how to repair it.

What Causes A Well To Become Contaminated?

There can be an almost countless number of sources that can continue your well water. Whether it is from a problem with your sewer line or chemicals from nearby farms, it can seem like an extremely difficult task to determine the source of the problem. Yet, this is essential for determining how to address the problem so that your water is safe to drink. Luckily, you should be relieved to learn that you can hire professionals that are able to run sophisticated tests on water samples to determine the exact concentrations of any contaminants, which will help to determine the most likely source and the best option for correcting the problem.

How Can A Contaminated Well Be Corrected?

The exact steps taken to correct a contented well will largely depend on the type and concentration of the contaminant. In instances where bacteria is making the water unsafe, you may need to install a device that can sanitize the water coming into the home with chlorine. Fortunately, this is a relatively simple upgrade to make, and most water well technicians will be able to complete this upgrade in less than a day.

Sadly, chemical contamination can be more difficult to correct. In addition to installing a filter to help absorb the harmful chemicals, it may also be necessary to use additives to neutralize any remaining contaminants in the water coming into the home. This can be a major project to undertake, but having access to safe water is more than worth this investment.

A water well can experience potentially serious contamination issues from many different causes. While it is possible to correct many of these contaminants, you will need to be informed about the steps for determining the cause of your well’s contamination and the potential options for correcting it. Being armed with this information will help you to better understand what must be done and what you can expect from repairing this issue. Contact a business, such as Mayer’s Well Drilling, if you need a new well or advice about your existing well.   

Learn More

Choosing Heating Oil For Your Home

Homeowners have long debated what fuel is best for their heating needs. Heating oil offers many advantages, but it is subject to the fluctuations of the oil market. However, the price of oil has dropped steeply in recent months, meaning heating oil is a better choice than ever before. If you are considering switching to heating oil, now is an excellent time to do so. 


At the beginning of 2016, the price of a barrel of oil had dropped to less than $30.00. Not too long ago, oil was around $100 per barrel and had been there for some time. The price drop is due to a higher level of oil production, especially in the US, and lower global demand. Experts expect this trend to continue, with oil prices dropping to as low as $20 per barrel. In short, you can expect heating oil to be extremely affordable for the foreseeable future. Since price volatility was one of the main disadvantages of this fuel, it is now one of your better bets for affordable heating. 


You may be surprised to learn how environmentally safe heating oil is. Due to advances in technology, oil releases almost no emissions into the atmosphere. In some instances, the oil is blended with biofuels that make heating oil an even better option for the environment. Heating oil compares quite favorably with natural gas, which produces 18% of the world’s methane emissions. In reality, heating oil is quite green when used properly.


Over 28 million US residents use heating oil in large part because of its high-performance level. Heating oil is an effective and efficient fuel. In fact, the efficiency level is between 85% and 95%. This statistic means that almost all of your heating expenses actually produce warmth for your home. No other fuel delivers that level of efficiency.  Heating oil also burns at a much hotter level than natural gas, meaning your home gets warm and comfortable quickly. 

Choosing heating oil for your home makes more sense now than ever. Not only are gas prices down at the pump, the price of all oil products have dropped and should continue to drop. Home heating oil is an affordable and efficient choice for your home. In addition, you can feel good about its effect on the environment. Technological advances have made heating oil much cleaner and greatly lessened its negative impact on our planet. You would be wise to take advantage of all the benefits heating oil offers. For more information, tlak to a professional like Fox Fuel Co.

Learn More

Four Things You Can Do To Help Improve Well Water Quality For Your Home

Quality water may be an issue for your home, which can be due to things like hard water, contamination and well problems. This is why you may want to consider different improvement options for the water of your home, such as installing water filtration or a water softener. Here are some actions you can take to improve your water quality if you are on a well.

1. Sanitize Your Well Regularly To Prevent Bacteria Growth

There are many different types of organisms that can grow in your well water. Sanitizing treatments are important to ensure that you do not have bacteria growing in your water and to keep your water safe for drinking. You will want to sanitize as often as every few months to prevent bacteria growth in your well.

2. Install A Water Filtration System For Your Well

Another option that you may want to consider for your well is a simple filtration system. This can be a cartridge type system at the well that uses a coal filter. This will remove any debris from the water, as well as some mineral deposits. This can be good if you have a minimal hard water problem, but it will not do anything to reduce well contamination and bacteria in the water.

3. Use A Water Softener To Prevent Hard Water Problems In Your Home

A water softener system is a more complete filtration system that you can have installed for your well. These systems use different methods to remove the mineral content from the water. If you live in an area with high mineral content in the water, a softener system can be a good investment for the plumbing in your home.

4. Have A Whole Well Water Purification System Installed To Deal With Serious Problems

There are other water problems that you may need to deal with, such as high alkalinity or contamination. For these types of problems, you will need to have a complete well water purification system. This removes all the contaminates from the water to provide your home with clean drinking water.

Assess your personal situation, and consider which options are necessary to improve the water quality of the well for your home. If you need to improve the water quality of your home, contact a well repair service such as David Cannon Well Drilling and ask them about some of these solutions to improve your water quality.

Learn More

What Your Boiler Might Be Telling You: A Few Clues There Is Something Wrong With It

To save from having to call for an emergency boiler repair technician in the middle of a cold night, be sure to pay attention to what your boiler is telling you. Long before the unit quits working, there will be little signs that something is wrong. It is important that you listen to the boiler as it runs. When these signs are not noticed or ignored,  you will find yourself in trouble. Here are a few clues that your boiler needs some type of maintenance.


While your boiler makes noise when it is running properly, if you notice that the noise changes or gets louder, it is asking you for help. When you hear a hissing noise, it is usually due to an uneven water level caused by sludge in the tank. If left unattended, the boiler will either shut down completely and need to be replaced. If there is a build up of pressure in the tank, it could result in an explosion.


The main immediate concern about odors coming from a boiler is a gas leak. The only thing this does to the boiler is make it less efficient, and it is a waste of gas. However, the gas can cause people to get sick or possibly die. Of course, the gas leaking is flammable and may cause a fire if there is a spark or the fumes reach the pilot light. The leak may be anywhere in the system, including the ventilation system.


If you notice a damp or wet patch near the bottom or your boiler, having a repair technician come to fix the leak will save you a considerable amount of  money on your fuel bill. In addition to needing more fuel to heat your home, a lack of water can cause the unit to break down. This will result in a repair bill that is larger than if you had the leak fixed. Leaks can be caused by a problem with the pump or pressure relief valve, or there could be a small hole in one of the pipes.

The boiler provides your house with heat and hot water. To save money, proper maintenance is required to keep it running as efficiently as possible. Regular maintenance can also help you find a problem before it requires a major repair. Aside from keeping your fuel bills low and your home at a comfortable temperature, keeping your boiler in good condition is necessary to keep it from becoming a safety hazard. 

Learn More

What To Expect From Custom Steel Fabrication For Remote Mining Locations

When you are in charge of developing new structural components for mining operations, you are responsible for more than just a result that’s strong under tough conditions. Custom steel fabrication should meet the rigorous demands of remote delivery and set-up, the stresses of everyday mining environments, and the budgetary and time constraints you’re under for project completion. So whether you need trusses, crusher areas, chutes, tunnels, or beam work completed fast, there’s a few things to expect from the process of custom steel fabrication.

Quality Assurance

Getting a quality end-product for mining locations depends on finding a steel fabricator that employs skilled and experienced metal workers, as well as cutting-edge technology. High standards of quality assurance come with routine equipment upgrades to meet a wide range of industrial purposes and customization requirements. High quality assurance standards should also be met in both routine calibration of machinery used in milling and fabricating, in addition to the purity and sources of raw materials used in your components manufacture. If you want the best results for mining projects that will meet severe environmental extremes and long hours, quality assurance of every step involved in steel fabrication is key.

Delivery Capabilities

Beyond finding a fabricator that can uphold quality assurance needs in production of your next project, you need to find one that has the ability to transport your equipment to remote locations. Remote locations pose more of a challenge for custom metal fabrication, because there is little room for error in both fabrication stages and final delivery. Fabricators have the state-of-the-art equipment needed in their production facilities, but if they can’t make changes that will improve performance at your final location, you may be stuck with a product that is below your expectations. A fabricator should be able to offer modifications to the structure on-site to meet any changes or needs that you have during assembly.

Extensive Experience

For remote mining locations, you need to work with an experienced metal fabricator that can help you design customized features that are tailored to your operation. Metal workers can work with a wide range of industries, from marketing to engineering firms, but some don’t have the experience needed to fabricate specifically for high performance needs like mining. A metal fabricator should also be able to offer you options to improve costs, increase longevity of equipment, and optimize the output of your operation based on the performance of the fabricated result. Click here for info on your fabricating needs.

Learn More