Addressing Common Concerns About Water Well Contamination

Access to water is a necessity for any home, and if you have recently purchased a home that lacks access to a local sewer system, it will likely have a water well in place. However, there are many people that have limited experience with these devices, and this can cause them to be unsure of what should be done when a problem arises. Fortunately, after you have learned the following answers to questions about contaminated wells, you will likely find yourself better able to understand this issue and how to repair it.

What Causes A Well To Become Contaminated?

There can be an almost countless number of sources that can continue your well water. Whether it is from a problem with your sewer line or chemicals from nearby farms, it can seem like an extremely difficult task to determine the source of the problem. Yet, this is essential for determining how to address the problem so that your water is safe to drink. Luckily, you should be relieved to learn that you can hire professionals that are able to run sophisticated tests on water samples to determine the exact concentrations of any contaminants, which will help to determine the most likely source and the best option for correcting the problem.

How Can A Contaminated Well Be Corrected?

The exact steps taken to correct a contented well will largely depend on the type and concentration of the contaminant. In instances where bacteria is making the water unsafe, you may need to install a device that can sanitize the water coming into the home with chlorine. Fortunately, this is a relatively simple upgrade to make, and most water well technicians will be able to complete this upgrade in less than a day.

Sadly, chemical contamination can be more difficult to correct. In addition to installing a filter to help absorb the harmful chemicals, it may also be necessary to use additives to neutralize any remaining contaminants in the water coming into the home. This can be a major project to undertake, but having access to safe water is more than worth this investment.

A water well can experience potentially serious contamination issues from many different causes. While it is possible to correct many of these contaminants, you will need to be informed about the steps for determining the cause of your well’s contamination and the potential options for correcting it. Being armed with this information will help you to better understand what must be done and what you can expect from repairing this issue. Contact a business, such as Mayer’s Well Drilling, if you need a new well or advice about your existing well.   

Learn More

Choosing Heating Oil For Your Home

Homeowners have long debated what fuel is best for their heating needs. Heating oil offers many advantages, but it is subject to the fluctuations of the oil market. However, the price of oil has dropped steeply in recent months, meaning heating oil is a better choice than ever before. If you are considering switching to heating oil, now is an excellent time to do so. 


At the beginning of 2016, the price of a barrel of oil had dropped to less than $30.00. Not too long ago, oil was around $100 per barrel and had been there for some time. The price drop is due to a higher level of oil production, especially in the US, and lower global demand. Experts expect this trend to continue, with oil prices dropping to as low as $20 per barrel. In short, you can expect heating oil to be extremely affordable for the foreseeable future. Since price volatility was one of the main disadvantages of this fuel, it is now one of your better bets for affordable heating. 


You may be surprised to learn how environmentally safe heating oil is. Due to advances in technology, oil releases almost no emissions into the atmosphere. In some instances, the oil is blended with biofuels that make heating oil an even better option for the environment. Heating oil compares quite favorably with natural gas, which produces 18% of the world’s methane emissions. In reality, heating oil is quite green when used properly.


Over 28 million US residents use heating oil in large part because of its high-performance level. Heating oil is an effective and efficient fuel. In fact, the efficiency level is between 85% and 95%. This statistic means that almost all of your heating expenses actually produce warmth for your home. No other fuel delivers that level of efficiency.  Heating oil also burns at a much hotter level than natural gas, meaning your home gets warm and comfortable quickly. 

Choosing heating oil for your home makes more sense now than ever. Not only are gas prices down at the pump, the price of all oil products have dropped and should continue to drop. Home heating oil is an affordable and efficient choice for your home. In addition, you can feel good about its effect on the environment. Technological advances have made heating oil much cleaner and greatly lessened its negative impact on our planet. You would be wise to take advantage of all the benefits heating oil offers. For more information, tlak to a professional like Fox Fuel Co.

Learn More

Four Things You Can Do To Help Improve Well Water Quality For Your Home

Quality water may be an issue for your home, which can be due to things like hard water, contamination and well problems. This is why you may want to consider different improvement options for the water of your home, such as installing water filtration or a water softener. Here are some actions you can take to improve your water quality if you are on a well.

1. Sanitize Your Well Regularly To Prevent Bacteria Growth

There are many different types of organisms that can grow in your well water. Sanitizing treatments are important to ensure that you do not have bacteria growing in your water and to keep your water safe for drinking. You will want to sanitize as often as every few months to prevent bacteria growth in your well.

2. Install A Water Filtration System For Your Well

Another option that you may want to consider for your well is a simple filtration system. This can be a cartridge type system at the well that uses a coal filter. This will remove any debris from the water, as well as some mineral deposits. This can be good if you have a minimal hard water problem, but it will not do anything to reduce well contamination and bacteria in the water.

3. Use A Water Softener To Prevent Hard Water Problems In Your Home

A water softener system is a more complete filtration system that you can have installed for your well. These systems use different methods to remove the mineral content from the water. If you live in an area with high mineral content in the water, a softener system can be a good investment for the plumbing in your home.

4. Have A Whole Well Water Purification System Installed To Deal With Serious Problems

There are other water problems that you may need to deal with, such as high alkalinity or contamination. For these types of problems, you will need to have a complete well water purification system. This removes all the contaminates from the water to provide your home with clean drinking water.

Assess your personal situation, and consider which options are necessary to improve the water quality of the well for your home. If you need to improve the water quality of your home, contact a well repair service such as David Cannon Well Drilling and ask them about some of these solutions to improve your water quality.

Learn More

What Your Boiler Might Be Telling You: A Few Clues There Is Something Wrong With It

To save from having to call for an emergency boiler repair technician in the middle of a cold night, be sure to pay attention to what your boiler is telling you. Long before the unit quits working, there will be little signs that something is wrong. It is important that you listen to the boiler as it runs. When these signs are not noticed or ignored,  you will find yourself in trouble. Here are a few clues that your boiler needs some type of maintenance.


While your boiler makes noise when it is running properly, if you notice that the noise changes or gets louder, it is asking you for help. When you hear a hissing noise, it is usually due to an uneven water level caused by sludge in the tank. If left unattended, the boiler will either shut down completely and need to be replaced. If there is a build up of pressure in the tank, it could result in an explosion.


The main immediate concern about odors coming from a boiler is a gas leak. The only thing this does to the boiler is make it less efficient, and it is a waste of gas. However, the gas can cause people to get sick or possibly die. Of course, the gas leaking is flammable and may cause a fire if there is a spark or the fumes reach the pilot light. The leak may be anywhere in the system, including the ventilation system.


If you notice a damp or wet patch near the bottom or your boiler, having a repair technician come to fix the leak will save you a considerable amount of  money on your fuel bill. In addition to needing more fuel to heat your home, a lack of water can cause the unit to break down. This will result in a repair bill that is larger than if you had the leak fixed. Leaks can be caused by a problem with the pump or pressure relief valve, or there could be a small hole in one of the pipes.

The boiler provides your house with heat and hot water. To save money, proper maintenance is required to keep it running as efficiently as possible. Regular maintenance can also help you find a problem before it requires a major repair. Aside from keeping your fuel bills low and your home at a comfortable temperature, keeping your boiler in good condition is necessary to keep it from becoming a safety hazard. 

Learn More

What To Expect From Custom Steel Fabrication For Remote Mining Locations

When you are in charge of developing new structural components for mining operations, you are responsible for more than just a result that’s strong under tough conditions. Custom steel fabrication should meet the rigorous demands of remote delivery and set-up, the stresses of everyday mining environments, and the budgetary and time constraints you’re under for project completion. So whether you need trusses, crusher areas, chutes, tunnels, or beam work completed fast, there’s a few things to expect from the process of custom steel fabrication.

Quality Assurance

Getting a quality end-product for mining locations depends on finding a steel fabricator that employs skilled and experienced metal workers, as well as cutting-edge technology. High standards of quality assurance come with routine equipment upgrades to meet a wide range of industrial purposes and customization requirements. High quality assurance standards should also be met in both routine calibration of machinery used in milling and fabricating, in addition to the purity and sources of raw materials used in your components manufacture. If you want the best results for mining projects that will meet severe environmental extremes and long hours, quality assurance of every step involved in steel fabrication is key.

Delivery Capabilities

Beyond finding a fabricator that can uphold quality assurance needs in production of your next project, you need to find one that has the ability to transport your equipment to remote locations. Remote locations pose more of a challenge for custom metal fabrication, because there is little room for error in both fabrication stages and final delivery. Fabricators have the state-of-the-art equipment needed in their production facilities, but if they can’t make changes that will improve performance at your final location, you may be stuck with a product that is below your expectations. A fabricator should be able to offer modifications to the structure on-site to meet any changes or needs that you have during assembly.

Extensive Experience

For remote mining locations, you need to work with an experienced metal fabricator that can help you design customized features that are tailored to your operation. Metal workers can work with a wide range of industries, from marketing to engineering firms, but some don’t have the experience needed to fabricate specifically for high performance needs like mining. A metal fabricator should also be able to offer you options to improve costs, increase longevity of equipment, and optimize the output of your operation based on the performance of the fabricated result. Click here for info on your fabricating needs.

Learn More

Types Of Sifting Screens To Choose From

If you are looking for small minerals in dirt, sand or gravel, you will need to use a sifting screen. This is very useful if you are working in a garden and want to remove stones and other debris more rapidly in a garden. They are also useful if you are engaging in archaeology. You will likely need more than one type of sifting screen, since no one screen works under all circumstances. To catch minerals in the screen, the openings in the screen must be smaller than the size of the minerals.

The Composition of the Screens

The most durable screens are those that are made out of perforated metal. This is a sheet metal that has had holes punched through it. Other alternatives include wire mesh screens made out of one of several metal types. The frame is usually made out of wood that needs to be water-sealed to protect it from moisture that would otherwise cause it to rot.

Portable Screens

When engaged in back country surveying, consider purchasing a backpack screen. A removable nylon mesh makes it easier to carry the sifter and allows for you to carry other items with it. Once you have arrived at the site, remove the sifter from the carrying case and the remove the additional items.

Small and Large Sifters

Hand sifters are generally smaller and come with handles on each side that make the sifters easier to use and also protect the user’s hands from the minerals. On the other hand, if the goal is to sift through as much material as possible in a short time frame, the two-person sifters are idea. One person holds each end and drags the sifter upward to remove minerals and other debris.

Tilting Sifters

The materials are removed by shaking the sifter so that the gravel, dirt and sand can fall underneath. Some sifters are able to tilt so that it is easy to allow the gravel to slide from one side to another. There are also rocking sifters that come with a front lateral dowel and an adjustable height.

Double-Decker Sifters

If you need to sift through two different-sized meshes, you should get a double-decker screen. This option has two sifting screens, with one clamped on top of the other. First, the material that is captured on the top screen is collected. Then, the material caught by the bottom screen is collected.  

To learn more about sifting screens, contact a company like Midwestern Industries Inc

Learn More

Three Keys For Welding Services

When you want to get the most out of your welding services, it pays to understand how to get the help of the most qualified contractors your money can buy. No matter what sort of welding assistance you require, you’ll need to reach out to the highest quality welding contractors. There are a number of steps you will want to keep in mind when seeking these welding services and this guide will assist you in that regard. 

Consider Hiring Professional Mobile Welding Services

When looking to hire a welder, it pays to understand the benefits of going the mobile route. For one, it adds versatility to what they can provide for you, since these professionals are willing to meet you at any location. Mobile workers also to offer a wider selection of repairs, including fabrication, since welding, car service and more. Perhaps the best part of hiring a mobile welder is that the turnaround time on the work is directed. So as you look to hire a professional welder for your work, take inventory of your needs to see if a mobile welder might be helpful.

Always Get Your Hands On The Professional Welding Company’s Insurance Policy

Prior to allowing a welder to perform any work, ask for a copy of their insurance policy. You need the backing to know that if anything goes wrong with the job, you are covered without having to file suit or come out of pocket. Be sure that their insurance policy is current and up-to-date, so that you have the proper recourse. If there are any hangups with the welder’s insurance company, look elsewhere.

Shop Around For The Right Insurance Policy And Know The Costs

It’s important to know what you might pay when it comes time to getting quoted work done. You should shop around with maybe 5 to 6 different welding companies, in order to get a good indication of what you can expect. Price match and get quotes in writing so that you can get the best possible deal for your budget. With that said, people pay an average of $344 for standard welding jobs. This price can fluctuate depending on the scope and size of the project and the materials required.

Keep these points in mind and use them so that you are able to get the best welding services that you need. For further help, touch base with a welding contractor, like Checkpoint Welding & Fabrication, near you. 

Learn More